Picture is shown with optional steel stand
This light weight industrial bag filter housing is one of the most economical filter bag housings on the market. Made entirely of 100% polypropylene that is strong and highly resistant to a wide range of chemicals and comes with an interior heavy duty polypropylene restrainer basket. Made with UV inhibitor for long-lasting, all-weather operation and durability. Ideal for portable applications, this lightweight housing is immune to rust for a fraction of the cost of the competition. Twist-off lid design requires no tools for opening and closing vessel to provide quick and easy filter bag change-out. Rated for 100 psi at 110º F service for improved versatility. The clean wall design provides easy access, allowing manual cleaning or in-place flushing. Side inlet/bottom outlet eliminates sump to reduce waste. The self sealing bag results in no fluid by-pass for visibly clear results.
The 100XB bag filters measure 6"x20", which are equivalent to an industrial size #1 filter bag, have a 2.0 ft² of filter area with micron ratings as low as 1 micron absolute to 800 micron nominal at up to 55 gal/min. Inlet and outlet ports are 2". Maximum temperature is 110 degrees. 100XB dimensions are 30" tall and 7" diameter. Add approximately 8 inches when a stand is added.
Comes standard with Buna seals, if you are making Biodiesel you need to upgrade to a Viton Seal.
When filtering WVO it can filter in excess of 150 gallons before clogging when oil temp is ~100 degrees F and the oil has been allowed to properly settle. 100XB can be purchased alone or with a welded carbon steel stand.
|
